DOI:

https://doi.org/10.14483/22487638.11680

Publicado:

2017-03-04

Número:

Vol. 20 (2016): Edición Especial

Sección:

Investigación

Comparison of effects produced by real and ideal sags on an induction motor

Comparación de los efectos producidos por los huecos de tensión reales e ideales en un motor de inducción

Autores/as

  • Juan Camilo Urrego García Universidad Distrital Francisco José de Caldas
  • Wilmar Camilo Molina Gómez Universidad Distrital Francisco José de Caldas
  • Adolfo Andrés Jaramillo Matta Universidad Distrital Francisco José de Caldas

Palabras clave:

Clasificación de los huecos de tensión, Efectos producidos por los huecos de tension, Graficas de superficies en 3D, Modelos de huecos ideales y reales, Motor de inducción (es).

Palabras clave:

Euclidean distance, Effects produced by sags, Ideal and real sags model, Induction motor, Sags classification, 3D surface graphs. (en).

Resumen (en)

Context: Many researches have focused on the study of the effects of voltage sags on the induction mo­tor; however, most of these studies have been per­formed considering ideal voltage sags, with perfect falls and recoveries of 90º. This is due, in part, to the mathematical complexity involved in modeling real sags, and also to the lack of data to characterize a real sag.

Methodology: This paper analyzes the differences between the effects of the real and ideal sags in the behavior of an induction motor. For this analysis, we modeled 7500 real sags and 7500 ideal sags, varying their magnitude and duration. Subsequently, the in­duction motor is subjected to these voltage sags, and we examined the effect on the behavior of the varia­bles: current peaks, torque peaks and velocity losses.

Results: With this analysis we developed 3D surfa­ces of the effects of the real and ideal sags, on each analyzed variable of the induction motor; we also made comparative tables of the distances between those surfaces. Finally, we obtained new groups of severity with the real voltage sags, and the most re­levant cases of the differences between the surfaces resulting of real or ideal voltage sags.

Conclusions: The results show that, since the seve­rity tables on the variables (current peaks, torque peaks and loss of speed) change for each type of sag, the analysis performed on induction motors when subjected to voltage sags can vary drastically if they are considered ideal or real. On the other hand, it cannot be said that the effects are always greater or smaller with real or ideal sags, since the severity sur­faces have different crossing points.

Resumen (es)

Contexto: Muchas investigaciones se enfocan en el estudio de los efectos de los huecos de tensión sobre el Motor de Inducción (MdI); sin embargo, la mayo­ría de ellos se realizan considerando huecos de ten­sión ideales, con caídas y recuperaciones perfectas de 90º. Esto se debe tanto a la complejidad matemá­tica que implica modelar huecos reales, como a la falta de datos que permita caracterizarlos.

Metodología: En éste artículo se analizan las diferen­cias entre los efectos de los huecos de tensión reales e ideales en el comportamiento de un MdI. Para ello se modelan 7500 huecos de tensión reales y 7500 ideales, variando su magnitud y duración; posterior­mente el MdI se somete a dichos huecos de tensión y se analiza el efecto sobre las variables: picos de corriente, picos de par y pérdidas de velocidad.

Resultados: Se obtuvieron superficies 3D de los efectos de los huecos sobre cada variable analizada del MdI y tablas comparativas de las distancias en­tre dichas superficies. Finalmente se obtienen nue­vos grupos de severidad con los huecos de tensión reales y se determinan los casos más relevantes de la diferencias entre las superficies obtenidas con hue­cos de tensión reales e ideales.

Conclusiones: El análisis realizado a MdI sometidos a huecos de tensión puede variar drásticamente si se consideran ideales o reales; esto se debe a que las tablas de clasificación de severidad sobre las va­riables analizadas (picos de corriente, picos de par y pérdida de velocidad) cambian para cada tipo de hueco. No se puede afirmar que los efectos siempre son mayores o menores con huecos reales o ideales ya que las superficies de severidad presentan dife­rentes puntos de cruce.

Biografía del autor/a

Juan Camilo Urrego García, Universidad Distrital Francisco José de Caldas

Ingeniero Eléctrico de la Universidad Distrital Francisco José de Caldas. Bogotá

Wilmar Camilo Molina Gómez, Universidad Distrital Francisco José de Caldas

Ingeniero Eléctrico de la Universidad Distrital Francisco José de Caldas. Bogotá

Adolfo Andrés Jaramillo Matta, Universidad Distrital Francisco José de Caldas

Ingeniero Electrónico, Magister en Ingeniería Electrónica, Magister en Ingeniería-Énfasis en Automática, Doctor en Ingeniería Electrónica, Automática y Comunicaciones. Docente de la Universidad Distrital Francisco José de Caldas. Bogotá

Referencias

Aree, P. (2012). Effects of Large Induction Motors on Voltage Sag. Power and Energy Engineering Conference (APPEEC) (pp. 1-4). Asia-Pacific: IEEE.

Bollen J., M. H. (2000). Voltage Sags Characterization. En M. H. Bollen, Understanding Power Quality Problems:Voltage Sags and Interruptions (págs. 139 - 251). Wiley-IEEE Press.

Bollen J., M. H., Hager, M., & Roxenius, C. (2003). Effect of induction motors and other loads on voltage dips: theory and measurements. Power Tech Conference Proceedings (pág. 6 pp. Vol.3). Bologna: IEEE.

Bort, J. V. (2002). Estudio del Modelo Matemático del Motor de Inducción Trifásico. Tarragona: UNIVERSITAT ROVIRA I VIRGILI.

Caicedo N. J. E., Navarro J. L. F., Rivas T. E., & Santamaría P. F. (2012), Simulation of voltage sag characteristics in power systems. Revista Tecnura, Universidad Distrital Francisco Jose de Caldas,17.

Chen, L., & Xiao, X. (2012). Voltage sags frequency assessment considering the coordination of protection system. Harmonics and Quality of Power (ICHQP), 15th International Conference on (págs. 932-935). Hong Kong: IEEE.

García Quintero, E., Villada Duque, F., & Cadavid Carmona, D. (2011). Nuevo factor para la caracterización de huecos de tensión. Revista Facultad de Ingeniería Universidad de Antioquia, 12.

Guasch Pesquer, L. (2006). Efectos de los huecos de tensión en las máquinas de inducción y en los transformadores trifásicos. Universitat Politècnica de Catalunya: Catalunya.

Guasch Pesquer, L., Córcoles, F., & Pedra, J. (2000). Effects of unsymmetrical voltage sag types E, F and G on induction motors. Harmonics and Quality of Power. Proceedings. Ninth International Conference on (págs. 796-803 vol.3). Orlando, FL: IEEE.

Guasch Pesquer, L., Córcoles, F., & Pedra, J. (2004). Effects of symmetrical and unsymmetrical voltage sags on induction machines. Power Delivery, IEEE Transactions on, 774-782.

Hedayati, M., & Mariun, N. (2012). Assessment of different voltage sags on performance of induction motors operated with shunt FACTS. Power Electronics and Drive Systems Technology (PEDSTC) (págs. 483-489). Tehran: IEEE.

Jaramillo Matta, A. A. (2010). Estimación de parámetros y efectos de los huecos de tensión en la máquina de inducción trifásica. Tarragona: Universitat Rovira i Virgili.

Jaramillo Matta, A. A., Guasch Pesquer, L., & Trujillo Rodríguez, C. L. (2015). Classification of voltage sags according to the severity of the effects on the induction motor. DYNA, 96-104.

Pedra, J., Sainz, L., & Córcoles, F. (2007). Effects of symmetrical voltage sags on squirrel cage induction motors. Generation, Transmission & Distribution, IET, 1672-1680.

Urrego, J., Molina, W., & Jaramillo, A. (2015). Effects produced by real sags on an induction motor. Revista Tecnura, Universidad Distrital Francisco Jose de Caldas, 19 (CITIE), 157-163. doi: 10.14483/udistrital.jour.tecnura.2015.ICE.a0

Cómo citar

APA

Urrego García, J. C., Molina Gómez, W. C., y Jaramillo Matta, A. A. (2017). Comparison of effects produced by real and ideal sags on an induction motor. Tecnura, 20, 64–81. https://doi.org/10.14483/22487638.11680

ACM

[1]
Urrego García, J.C. et al. 2017. Comparison of effects produced by real and ideal sags on an induction motor. Tecnura. 20, (mar. 2017), 64–81. DOI:https://doi.org/10.14483/22487638.11680.

ACS

(1)
Urrego García, J. C.; Molina Gómez, W. C.; Jaramillo Matta, A. A. Comparison of effects produced by real and ideal sags on an induction motor. Tecnura 2017, 20, 64-81.

ABNT

URREGO GARCÍA, Juan Camilo; MOLINA GÓMEZ, Wilmar Camilo; JARAMILLO MATTA, Adolfo Andrés. Comparison of effects produced by real and ideal sags on an induction motor. Tecnura, [S. l.], v. 20, p. 64–81, 2017. DOI: 10.14483/22487638.11680. Disponível em: https://revistas.udistrital.edu.co/index.php/Tecnura/article/view/11680. Acesso em: 28 mar. 2024.

Chicago

Urrego García, Juan Camilo, Wilmar Camilo Molina Gómez, y Adolfo Andrés Jaramillo Matta. 2017. «Comparison of effects produced by real and ideal sags on an induction motor». Tecnura 20 (marzo):64-81. https://doi.org/10.14483/22487638.11680.

Harvard

Urrego García, J. C., Molina Gómez, W. C. y Jaramillo Matta, A. A. (2017) «Comparison of effects produced by real and ideal sags on an induction motor», Tecnura, 20, pp. 64–81. doi: 10.14483/22487638.11680.

IEEE

[1]
J. C. Urrego García, W. C. Molina Gómez, y A. A. Jaramillo Matta, «Comparison of effects produced by real and ideal sags on an induction motor», Tecnura, vol. 20, pp. 64–81, mar. 2017.

MLA

Urrego García, Juan Camilo, et al. «Comparison of effects produced by real and ideal sags on an induction motor». Tecnura, vol. 20, marzo de 2017, pp. 64-81, doi:10.14483/22487638.11680.

Turabian

Urrego García, Juan Camilo, Wilmar Camilo Molina Gómez, y Adolfo Andrés Jaramillo Matta. «Comparison of effects produced by real and ideal sags on an induction motor». Tecnura 20 (marzo 4, 2017): 64–81. Accedido marzo 28, 2024. https://revistas.udistrital.edu.co/index.php/Tecnura/article/view/11680.

Vancouver

1.
Urrego García JC, Molina Gómez WC, Jaramillo Matta AA. Comparison of effects produced by real and ideal sags on an induction motor. Tecnura [Internet]. 4 de marzo de 2017 [citado 28 de marzo de 2024];20:64-81. Disponible en: https://revistas.udistrital.edu.co/index.php/Tecnura/article/view/11680

Descargar cita

Visitas

485

Dimensions


PlumX


Descargas

Los datos de descargas todavía no están disponibles.

Artículos más leídos del mismo autor/a

Loading...