DOI:
https://doi.org/10.14483/22484728.13399Published:
2018-05-30Issue:
Vol. 12 No. 1 (2018)Section:
A Research VisionSimulador de reparación de aneurismas cerebrales para entrenamiento médico
Simulator of Brain Aneurysm Repair for Medical Training
Keywords:
Haptics, human-computer interaction, virtual reality, neurosurgery simulation, computer simulation (en).Keywords:
háptica, interacción humano-computadora, realidad virtual, simulación en neurocirugía, simulación por computadora (es).Downloads
Abstract (es)
El desarrollo de sistemas de simulación de procedimientos quirúrgicos se ha convertido desde hace algunos años en un tema de investigación para diversas áreas que incluyen a la computación, la robótica y la medicina, pues suponen una alternativa novedosa para la adquisición de habilidades médicas, planeación, guía y control postoperatorio; al mismo tiempo que representan retos significativos en términos de su diseño, implementación y validación. En este trabajo se presentan las experiencias y metodologías aplicadas al desarrollo de simuladores computarizados para entrenamiento virtual en la Unidad de Investigación y Desarrollo Tecnológico (UIDT) en el Hospital General de México (HGM) “Dr. Eduardo Liceaga”, de la Universidad Nacional Autónoma de México (UNAM). Como caso de estudio, se ejemplifica el desarrollo de un simulador para la reparación de aneurismas cerebrales, el cual ha involucrado la investigación en métodos de simulación computacional, visualización, sensaciones táctiles e interacción humano-computadora.
Abstract (en)
The development of simulation systems for surgical procedures has become a topic of research in several areas such as computer engineering, robotics and medicine in recent years, mainly because these systems suppose a novel alternative for the acquisition of medical skills, planning, guidance and post-operative control; while represent significant challenges in terms of their design, implementation and validation. This paper presents the experiences and methodologies applied to the development of computerized simulators for virtual training in the Research and Technological Development Unit (UIDT) in the General Hospital of Mexico (HGM) "Dr. Eduardo Liceaga" from the National Autonomous University of Mexico (UNAM). As a case of study, we can exemplify the development of a virtual reality simulator for the repair of cerebral aneurysms, which has involved research in methods for computer simulation, visualization, tactile sensations and human-computer interaction
References
A. Papangelou y W. Ziai, “The birth of neuro-simulation”, Neurocrit Care, vol. 13, n°. 2, pp. 167-168, 2010.
https://doi.org/10.1007/s12028-010-9440-4
M. J. Musacchio, A. P. Smith, C. A. McNeal, L. Munoz, D. M. Rothenberg, K. A. Von Roenn y R. W. Byrne, “Neuro-critical care skills training using a human patient simulator”, Neurocrit Care, vol. 13, n°. 2, pp. 169-175, 2010. https://doi.org/10.1007/s12028-010-9405-7
S. Delorme, D. Laroche, R. DiRaddo y R. F. Del Maestro, “NeuroTouch: a physics-based virtual simulator for cranial microneurosurgery training”, Neurosurgery, vol. 71, n°. 1 suppl operative, pp. 32-42, 2012.
M. Kersten-Oertel, S. S. J. Chen, S. Drouin, D. S. Sinclair y D. L. Collins, “Augmented reality visualization for guidance in neurovascular surgery”, Stud. Health Technol Inform., vol. 173, pp. 225-229, 2012.
Z. R. Yaniv, R. J. Webster, W. Fenz y J. Dirnberger, “Real-time surgery simulation of intracranial aneurysm clipping with patient-specific geometries and haptic feedback”, Proceedings SPIE, vol. 9415, n°. 1, 2015.
M. T. Lawton, “Seven Aneurysms: Tenets and Techniques for Clipping”, Stuttgart: Thieme, 2011. https://doi.org/10.1055/b-002-66278
O. R. Faha, “OSIRIX: An Open Source Platform for Advanced Multimodality Medical Imaging” 4th International Conference on Information & Communications Technology, Information & Communications Technology, Cairo, 2006.
P. Cignoni, M. Callieri, M. Corsini, M. Dellepiane, F. Ganovelli, y G. Ranzuglia, “MeshLab: an Open-Source Mesh Processing Tool,” Eurographics Italian Chapter Conference, Salerno, 2008.
A. Updegrove, N. M. Wilson, J. Merkow, H. Lan, A. L. Marsden y S. C. Shadden, “SimVascular: An Open Source Pipeline for Cardiovascular Simulation”, Annals of Biomedical Engineering, vol. 45, n°. 3, pp. 525-541, 2017. https://doi.org/10.1007/s10439-016-1762-8
F. Faure, “SOFA: A Multi-Model Framework for Interactive Physical Simulation”, Soft Tissue Biomechanical Modeling for Computer Assisted Surgery, vol. 11, 283-321, 2012. https://doi.org/10.1007/8415_2012_125
M. Macklin, M. Müller, N. Chentanez y K. Tae-Yong, “Unified particle physics for real-time applications”, ACM Transactions on Graphics, vol. 33, n°. 4. pp. 1-12, 2014. https://doi.org/10.1145/2601097.2601152
J. Bender, M. Müller, M. A. Otaduy, M. Teschner, y M. Macklin, “A Survey on Position-Based Simulation Methods in Computer Graphics”, Computer Graphics Forum, vol. 33, n°. 6. pp. 228-251, 2014. https://doi.org/10.1111/cgf.12346
M. Bro-Nielsen y S. Cotin, “Real-time Volumetric Deformable Models for Surgery Simulation using Finite Elements and Condensation”, Computer Graphics Forum, vol. 15, n°. 3, p. 57, 1996. https://doi.org/10.1111/1467-8659.1530057
M. Bro-Nielsen, “Finite element modeling in surgery simulation”, Proceedings of the IEEE, vol. 86, n°. 3, pp. 490-503, 1998. https://doi.org/10.1109/5.662874
J. Georgii y R. Westermann, “Corotated Finite Elements Made Fast and Stable”, Workshop in Virtual Reality Interactions and Physical Simulation (VRIPHYS), Grenoble, 2008.
M. Nesmea y F. Faurea, “Physically realistic interactive simulation for biological soft tissues”, Recent Research Developments in Biomechanics, vol 2, pp.1-22, 2005.
1.png)
.jpg)
