DOI:
https://doi.org/10.14483/23448393.16164Published:
2020-12-19Issue:
Vol. 26 No. 1 (2021): January-AprilSection:
Mechanical EngineeringAnálisis cuantitativo del ordenamiento de alúmina anódica nanoporosa obtenida a diferentes potenciales de anodizado
Quantitative Analysis of Nanoporous Anodic Alumina Ordering Obtained with Different Anodizing Potentials
Keywords:
Alúmina anódica nanoporosa, radio de regularidad, transformada rápida de Fourier, ordenamiento (es).Keywords:
Nanoporous anodic alumina, regularity ratio, Fast-Fourier transform, ordering (en).Downloads
References
A. M. Abd-Elnaiem y A. Gaber, “Parametric Study on the Anodization of Pure Aluminum Thin Film Used in Fabricating Nano-Pores Template”, Int. J. Electrochem. Sci., vol. 8, no. 7, pp. 9741-9751, 2013.
J. Zhang, Z. Li, Z. Zhang, T. Wu y H. Sun, “Optical and Magnetic Properties of Porous Anodic Alumina/Ni Nanocomposite Films”, J. Appl. Phys., vol. 113, no. 24, pp. 244-305, 2013. 10.1063/1.4812466. https://doi.org/10.1063/1.4812466 DOI: https://doi.org/10.1063/1.4812466
C. T.Wu et al., “Design of artificial Hollow Moth-Eye Structures Using Anodic Nanocones for High- Performance Optics”, Chem. Mater., vol. 22, no. 24, pp. 6583-6589, 2010. 10.1021/cm102408d. https://doi.org/10.1021/cm102408d DOI: https://doi.org/10.1021/cm102408d
A. Santos y T. Kumeria, “Nanoporous anodic alumina for optical biosensing”, en Nanoporous Alumina, no. ago., Suiza: Springer International Publishing, 2015, pp. 219-247. https://doi.org/10.1007/978-3-319-20334-8_7 DOI: https://doi.org/10.1007/978-3-319-20334-8_7
P. E. Petrochenko et al., “Nanoporous Aluminum Oxide Membranes Coated with Atomic Layer Deposition-Grown Titanium Dioxide for Biomedical Applications: An in Vitro Evaluation”, J. Biomed. Nanotechnol., vol. 11, no. 12, pp. 2275-2285, 2015. https://doi.org/10.1166/jbn.2015.2169 DOI: https://doi.org/10.1166/jbn.2015.2169
M. Singh y D. Gobind, “Highly Ordered Anodic Porous Alumina Membrane and its Surface Modification Approaches for Biomedical Application”, IOSR J. Appl. Chem., vol. 7, no. 1, pp. 17-34, 2014. https://doi.org/10.9790/5736-07111734 DOI: https://doi.org/10.9790/5736-07111734
P. Banerjee, I. Perez, L. Henn-Lecordier, S. B. Lee y G.W. Rubloff, “Nanotubular Metal-Insulator-Metal Capacitor Arrays for Energy Storage”, Nat. Nanotechnol., vol. 4, no. 5, pp. 292-296, 2009. https://doi.org/10.1038/nnano.2009.37 DOI: https://doi.org/10.1038/nnano.2009.37
S. Sukarno, C. S. Law y A. Santos, “Realisation and Optical Engineering of Linear Variable Bandpass Filters in Nanoporous Anodic Alumina Photonic Crystals”, Nanoscale, no. May, 2017. https://doi.org/10.1039/C7NR02115A DOI: https://doi.org/10.1039/C7NR02115A
P. C. Stair et al., “Novel, Uniform Nanostructured Catalytic Membranes”, Top. Catal., vol. 39, no. 3-4, pp. 181-186, 2006. https://doi.org/10.1007/s11244-006-0055-0 DOI: https://doi.org/10.1007/s11244-006-0055-0
A. Mutalib, J. Zhou, M. R. Nussio, D. Losic, J. G. Shapter y N. H. Voelcker, “Pore Spanning lipid bilayers on silanised nanoporous alumina membranes”, Proceedings of SPIE, 2008, vol. 7267, no. May, pp. 1-10. https://doi.org/10.1117/12.808769 DOI: https://doi.org/10.1117/12.808769
Y. Chen et al., “Biomimetic Nanoporous Anodic Alumina Distributed Bragg Reflectors in the Form of Films and Microsized Particles for Sensing Applications”, ACS Appl. Mater. Interfaces, vol. 7, no. 35, pp. 19816-19824, 2015. https://doi.org/10.1021/acsami.5b05904 DOI: https://doi.org/10.1021/acsami.5b05904
M. Porta-i-Batalla, C. Eckstein, E. Xifré-Pérez, P. Formentín, J. Ferré-Borrull y L. F. Marsal, “Sustained, Controlled and Stimuli-Responsive Drug Release Systems Based on Nanoporous Anodic Alumina with Layer By- Layer Polyelectrolyte”, Nanoscale Res. Lett., vol. 11, no. 372, pp. 1-9, 2016. https://doi.org/10.1186/s11671-016-1585-4 DOI: https://doi.org/10.1186/s11671-016-1585-4
H. Masuda, F. Hasegwa y S. Ono, “Self-Ordering of Cell Arrangement of Anodic Porous Alumina Formed in Sulfuric Acid Solution”, J. Electrochem. Soc., vol. 144, no. 5, p. L127, 1997. https://doi.org/10.1149/1.1837634 DOI: https://doi.org/10.1149/1.1837634
F. Keller, M. S. Hunter y D. L. Robinson, “Structural Features of Oxide Coatings on Aluminum”, J. Electrochem. Soc., vol. 100, no. 9, pp. 411-419, 1953. https://doi.org/10.1149/1.2781142 DOI: https://doi.org/10.1149/1.2781142
J. P. O’Sullivan y G. C. Wood, “The Morphology and Mechanism of Formation of Porous Anodic Films on Aluminium”, , vol. 317, no. 1531, pp. 511-543, 1970. https://doi.org/10.1098/rspa.1970.0129 DOI: https://doi.org/10.1098/rspa.1970.0129
A. Christoulaki, C. Moretti, A. Chennevi`ere, E. Dubois y N. Jouault, “Improving Structural Features of Nanoporous Alumina Using Deuterated Electrolytes”, Microporous Mesoporous Mater., vol. 303, no. mar., 2020. https://doi.org/10.1016/j.micromeso.2020.110201 DOI: https://doi.org/10.1016/j.micromeso.2020.110201
H. Masuda y K. Fukuda, “Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic Alumina”, Science, vol. 268, pp. 1466-1468, 1995. https://doi.org/10.1126/science.268.5216.1466 DOI: https://doi.org/10.1126/science.268.5216.1466
H. Masuda, K. Yada y A. Osaka, “Self-Ordering of Cell Configuration of Anodic Porous Alumina with Large- Size Pores in Phosphoric Acid Solution”, J. Appl. Phys, vol. 37, no. 11A, pp. 1340-1342, 1998. https://doi.org/10.1143/JJAP.37.L1340 DOI: https://doi.org/10.1143/JJAP.37.L1340
O. Jessensky, F. M¨uller y U. G¨osele, “Self-Organized Formation of Hexagonal Pore Structures in Anodic Alumina”, J. Electrochem. Soc., vol. 145, no. 11, pp. 3735-3740, 1998. https://doi.org/10.1149/1.1838867 DOI: https://doi.org/10.1149/1.1838867
K. Nielsch, J. Choi, K. Schwirn, R. B.Wehrspoh y U. G¨osele, “Self-Ordering Regimes of Porous Alumina: The10 Porosity Rule”, Nano Lett., vol. 2, no. 7, pp. 677-680, 2002. https://doi.org/10.1021/nl025537k DOI: https://doi.org/10.1021/nl025537k
G. D. Sulka y K. G. Parkoła, “Temperature Influence on Well-Ordered Nanopore Structures Grown by Anodization of Aluminium in Sulphuric Acid”, Electrochim. Acta, vol. 52, no. 5, pp. 1880-1888, 2007. https://doi.org/10.1016/j.electacta.2006.07.053 DOI: https://doi.org/10.1016/j.electacta.2006.07.053
O. Nishinaga, T. Kikuchi, S. Natsui y R. O. Suzuki, “Rapid Fabrication of Self-Ordered Porous Alumina with 10-/Sub-10-Nm-Scale Nanostructures By Selenic Acid Anodizing.”, Sci. Rep., vol. 3, p. 2748, 2013. https://doi.org/10.1038/srep02748 DOI: https://doi.org/10.1038/srep02748
S. Ono, M. Saito, M. Ishiguro y H. Asoh, “Controlling Factor of Self-Ordering of Anodic Porous Alumina”, J. Electrochem. Soc., vol. 151, no. 8, p. B473, 2004. https://doi.org/10.1149/1.1767838 DOI: https://doi.org/10.1149/1.1767838
B. Sellarajan, M. Sharma, S. K. Ghosh, H. S. Nagaraja, H. C. Barshilia y P. Chowdhury, “Effect of Electrolyte Temperature on The Formation of Highly Ordered Nanoporous Alumina Template”, Microporous Mesoporous Mater., vol. 224, pp. 262-270, 2016. https://doi.org/10.1016/j.micromeso.2015.12.045 DOI: https://doi.org/10.1016/j.micromeso.2015.12.045
M. A. Kashi y A. Ramazani, “The Effect of Temperature and Concentration on The Self-Organized Pore Formation in Anodic Alumina”, J. Phys. D. Appl. Phys., vol. 38, no. 14, pp. 2396-2399, 2005. https://doi.org/10.1088/0022-3727/38/14/015 DOI: https://doi.org/10.1088/0022-3727/38/14/015
P. G. Wernick, S., Pinner y R., Sheasby, The Surface Treatment and Finishing of Aluminum and its Alloys, 5a ed., Gran Bretaña: ASM International, 1987.
L. Zaraska, A. Brudzisz, E.Wierzbicka y G. D. Sulka, “The Effect of Electrolyte Change on The Morphologyand Degree of Nanopore Order of Porous Alumina Formed By Two-Step Anodization”, Electrochimica Acta, vol. 198. pp. 259-267, 2016. https://doi.org/10.1016/j.electacta.2016.03.050 DOI: https://doi.org/10.1016/j.electacta.2016.03.050
C. K. Chung, M. W. Liao, H. C. Chang y C. T. Lee, “Effects of Temperature and Voltage Mode on Nanoporous Anodic Aluminum Oxide Films By One-Step Anodization”, Thin Solid Films, vol. 520, no. 5, pp. 1554-1558, 2011. https://doi.org/10.1016/j.tsf.2011.08.053 DOI: https://doi.org/10.1016/j.tsf.2011.08.053
W. Lee y S.-J. Park, “Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures”, Chem. Rev., vol. 114, no. 15, pp. 7487-7556, 2014. https://doi.org/10.1021/cr500002z DOI: https://doi.org/10.1021/cr500002z
I. V. Roslyakov et al., “Growth of Porous Anodic Alumina on Low-Index Surfaces of Al Single Crystals”, J. Phys. Chem. C, vol. 121, no. 49, pp. 27511-27520, 2017. https://doi.org/10.1021/acs.jpcc.7b09998 DOI: https://doi.org/10.1021/acs.jpcc.7b09998
T. Fukuda y V. I. Chani (Eds.), Shaped Crystals: Growth by Micro Pulling Down Technique, Springer, 2007. DOI: https://doi.org/10.1007/978-3-540-71295-4
A. Rauf, M. Mehmood, M. Ahmed, M. ul Hasan y M. Aslam, “Effects of Ordering Quality of The Pores on The Photoluminescence of Porous Anodic Alumina Prepared in Oxalic Acid”, J. Lumin., vol. 130, no. 5, pp. 792-800, 2010. https://doi.org/10.1016/j.jlumin.2009.11.035 DOI: https://doi.org/10.1016/j.jlumin.2009.11.035
D. E. Boldrini, G. M. Tonetto y D. E. Damiani, “Overall Effectiveness Factor for Slab Geometry in a Three- Phase Reaction System”, Int. J. Chem. React. Eng., vol. 12, no. 1, pp. 417-427, 2014. https://doi.org/10.1515/ijcre-2014-0018 DOI: https://doi.org/10.1515/ijcre-2014-0018
C. Toccafondi, W. J. Stepniowski, M. Leoncini y M. Salerno, “Advanced Morphological Analysis of Patterns of Thin Anodic Porous Alumina”, Mater. Charact., vol. 94, pp. 26-36, 2014. https://doi.org/10.1016/j.matchar.2014.05.003
C. Cheng, “Quantitative evaluation of self-ordering in anodic porous alumina”, en Electro-Chemo- Mechanics of Anodic Porous Alumina Nano-Honeycombs: Self-Ordered Growth and Actuation, Springer Verlag Berlin Heidelberg, 2015, pp. 91-104. https://doi.org/10.1007/978-3-662-47268-2_6 DOI: https://doi.org/10.1007/978-3-662-47268-2_6
L. Sacco, I. Florea, M. Chˆatelet y C. Cojocaru, “Investigation of Porous Anodic Alumina Templates Formed By Anodization of Single-Crystal Aluminum Substrates”, Thin Solid Films, vol. 660, no. abril, pp. 213- 220, 2018. https://doi.org/10.1016/j.tsf.2018.06.015 DOI: https://doi.org/10.1016/j.tsf.2018.06.015
X. Z. Liu, M. X. Xu, Y. M. Tian, M. Shang y P. Zhang, “Regularity Control of Porous Anodic Alumina and Photodegradation Activity of Highly Ordered Titania Nanostructures”, Trans. Nonferrous Met. Soc. China, vol. 16, pp. s341-s344, 2006. https://doi.org/10.1016/S1003-6326(06)60206-9 DOI: https://doi.org/10.1016/S1003-6326(06)60206-9
C. Wang, S. Tanaka, K. Saito, T. Shimizu y S. Shingubara, “Fabrication of Ordered Arrays of Anodic Aluminum Oxide Pores with Interpore Distance Smaller Than the Pitch of Nano-Pits Formed By Ion Beam Etching”, J. Mater. Sci. Nanotechnol., vol. 1, no. 1, pp. 1-6, 2014. https://doi.org/10.15744/2348-9812.1.S105 DOI: https://doi.org/10.15744/2348-9812.1.S105
W. J. Stepniowskia, A. Nowak-Stepniowska, A. Presz, . Czujko y R. A. Varin, “The Effects of Time and Temperature on the Arrangement of Anodic Aluminum Oxide Nanopores”, Mater. Charact., vol. 91, pp. 1-9, 2014. https://doi.org/10.1016/j.matchar.2014.01.030 DOI: https://doi.org/10.1016/j.matchar.2014.01.030
C. Toccafondi, W. J. Stepniowski, M. Leoncini y M. Salerno, “Advanced Morphological Analysis of Patterns of Thin Anodic Porous Alumina”, Materials Characterization, vol. 94. pp. 26-36, 2014. https://doi.org/10.1016/j.matchar.2014.05.003 DOI: https://doi.org/10.1016/j.matchar.2014.05.003
M. Michalska-Doma´nska, M. Norek, W. J. Stepniowsk y B. Budner, “Fabrication of High Quality Anodic Aluminum Oxide (AAO) on Low Purity Aluminum - A Comparative Study with The AAO Produced on High Purity Aluminum”, Electrochim. Acta, vol. 105, pp. 424-432, 2013. https://doi.org/10.1016/j.electacta.2013.04.160 DOI: https://doi.org/10.1016/j.electacta.2013.04.160
L. Zaraska,W. J. Stepniowski, M. Jaskuła y G. D. Sulka, “Analysis of Nanopore Arrangement of Porous Alumina Layers Formed By Anodizing in Oxalic Acid At Relatively High Temperatures”, Appl. Surf. Sci., vol. 305, pp. 650- 657, 2014. https://doi.org/10.1016/j.apsusc.2014.03.154 DOI: https://doi.org/10.1016/j.apsusc.2014.03.154
R. Syed, D. Sen, K. V. Mani Krishna y S. K. Ghosh, “Fabrication of Highly Ordered Nanoporous Alumina Membranes: Probing Microstructures by SAXS, FESEM and AFM”, Microporous Mesoporous Mater., vol. 264, no. December 2017, pp. 13-21, 2018. https://doi.org/10.1016/j.micromeso.2017.12.034 DOI: https://doi.org/10.1016/j.micromeso.2017.12.034
A. M. Abd-Elnaiem, A. M. Mebed, W. J. Stepniowski y T. Czujko, “Characterization of Arrangement and Geometry of Porous Anodic Alumina Formed By One-Step Anodization of Al-1 Wt% Si Thin Films”, Surf. Coatings Technol., vol. 307, pp. 359-365, 2016. https://doi.org/10.1016/j.surfcoat.2016.09.013 DOI: https://doi.org/10.1016/j.surfcoat.2016.09.013
W. J. Stepniowski, T. Durejko, M. Michalska-Doma´nska, M. Łazi´nska y J. Aniszewska, “Characterization of Nanoporous Anodic Aluminum Oxide Formed on Laser Pre-Treated Aluminum”, Mater. Charact., vol. 122, pp. 130- 136, 2016. https://doi.org/10.1016/j.matchar.2016.10.034 DOI: https://doi.org/10.1016/j.matchar.2016.10.034
W. J. Stepniowski, M. Michalska-Doma´nska, M. Norek y T. Czujko, “Fast Fourier Transform Based Arrangement Analysis of Poorly Organized Alumina Nanopores Formed Via Self-Organized Anodization in Chromic Acid”, Mater. Lett., vol. 117, pp. 69-73, 2014. https://doi.org/10.1016/j.matlet.2013.11.099 DOI: https://doi.org/10.1016/j.matlet.2013.11.099
K. S. Choudhari, S. D. Kulkarni, C. Santhosh y S. D. George, “Photoluminescence Enhancement and Morphological Properties of Nanoporous Anodic Alumina Prepared in Oxalic Acid with Varying Time and Temperature”, Microporous Mesoporous Mater., vol. 271, no. April, pp. 138-145, 2018. https://doi.org/10.1016/j.micromeso.2018.06.004 DOI: https://doi.org/10.1016/j.micromeso.2018.06.004
S. M. Aguilar-Sierra y F. Echeverría E, “Improvement of Electropolishing of 1100 Al Alloy for Solar Thermal Applications”, J. Mater. Eng. Perform., vol. 27, no. 3, pp. 1387-1395, Mar. 2018. https://doi.org/10.1007/s11665-018-3212-2 DOI: https://doi.org/10.1007/s11665-018-3212-2
C. A. Schneider, W. S. Rasband y K. W. Eliceiri, “NIH Image To ImageJ: 25 Years of Image Analysis”, Nat. Methods, vol. 9, pp. 671-675, 2012. https://doi.org/10.1038/nmeth.2089 DOI: https://doi.org/10.1038/nmeth.2089
I. Horcas, R. Fernandez, J. M. Gomez-Rodriguez, J. Colchero, J. Gomez-Herrero y A. M. Baro, “WSXM: A Software for Scanning Probe Microscopy and A Tool for Nanotechnology”, Rev. Sci. Instrum., vol. 78, no. 1, p. 013705, 2007. https://doi.org/10.1063/1.2432410 DOI: https://doi.org/10.1063/1.2432410
Y. L. Rao, V. Anandan y G. Zhang, “Fast Fourier Transform Analysis of Pore Pattern in Anodized Alumina Formed at Various Conditions”, J. Nanosci. Nanotechnol., vol. 5, no. 12, pp. 2070-2075, 2005. https://doi.org/10.1166/jnn.2005.509 DOI: https://doi.org/10.1166/jnn.2005.509
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
License
Copyright (c) 2020 Sara María Aguilar-Sierra, Félix Echeverría
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
From the edition of the V23N3 of year 2018 forward, the Creative Commons License "Attribution-Non-Commercial - No Derivative Works " is changed to the following:
Attribution - Non-Commercial - Share the same: this license allows others to distribute, remix, retouch, and create from your work in a non-commercial way, as long as they give you credit and license their new creations under the same conditions.
2.jpg)
