DOI:
https://doi.org/10.14483/23448393.22822Published:
2025-11-13Issue:
Vol. 30 No. 3 (2025): September-DecemberSection:
Mechanical EngineeringTwo-Phase Mixture Numerical Study of Nanofluid Flow in a Lithium-Ion Battery Cooling System
Estudio numérico de mezcla bifásica del flujo de nanofluidos en un sistema de enfriamiento para una batería de iones de litio
Keywords:
computational fluid dynamics, lithium-ion battery, cooling, battery thermal management, mixture (en).Keywords:
dinámica de fluidos computacional, batería de iones de litio, refrigeración, nanofluidos, mezcla, gestión térmica de la batería (es).Downloads
References
REFERENCES
W. Li et al., “A holistic electrothermal profiles online sensing method with sparse sensor system in large-format battery pack,” IEEE Trans. Ind. Elect., vol. 72, no. 10, pp. 10257-10266, 2025. https://doi.org/10.1109/TIE.2025.3555004
S. Vashisht, D. Rakshit, S. Panchal, M. Fowler, and R. Fraser, “Experimental estimation of heat generating parameters for battery module using inverse prediction method,” Int. Comm. Heat Mass Trans., vol. 162, art. 108539, 2025. https://doi.org/10.1016/j.icheatmasstransfer.2024.108539
E. Yousefi et al., “Electrochemical-thermal modeling of phase change material battery thermal management systems: investigating mesh types for accurate simulations,” Int. J. Heat Mass Tran., vol. 247, art. 127107, 2025. https://doi.org/10.1016/j.ijheatmasstransfer.2025.127107
A. H. Vakilzadeh, A. B. Sarvestani, K. Javaherdeh, R. Kamali, and S. Panchal, “To what extent does local oscillation influence the thermal performance of finned PCM-based energy storage systems: A numerical study,” Int. J. Heat Fluid Flow, vol. 114, art. 109798, 2025. https://doi.org/10.1016/j.ijheatfluidflow.2025.109798
Q. Yao, P. Kollmeyer, J. Chen, S. Panchal, O. Gross, amd A. Emadi, “Study of high-power and high-energy lithium-ion batteries: From parameter analysis to physical modeling and experimental validation” SAE Technical Paper, 2025. [Online]. Available: https://www.sae.org/publications/technical-papers/content/2025-01-8372/
H. Alhumade, E. Almatrafi, M. Rawa, A. S. El-Shafay, C. Qi, and Y. Khetib, “Numerical study of simultaneous use of non-Newtonian hybrid nano-coolant and thermoelectric system in cooling of lithium-ion battery and changes in the flow geometry,” J. Power Sources, vol. 540, art. 231626, 2022. https://doi.org/10.1016/j.jpowsour.2022.231626
Y. Yang et al., “Thermal-electrical characteristics of lithium-ion battery module in series connection with a hybrid cooling,” Int. J. Heat Mass Tran., vol. 184, art. 122309, 2022. https://doi.org/10.1016/j.ijheatmasstransfer.2021.122309
G. Liao, W. Wang, F. Zhang, E. Jiaqiang, J. Chen, and E. Leng, “Thermal performance of lithium-ion battery thermal management system based on nanofluid,” Appl. Therm. Eng., vol. 216, art. 118997, 2022. https://doi.org/10.1016/j.applthermaleng.2022.118997
M. Faizan, S. Pati, and P. Randive, “Implications of novel cold plate design with hybrid cooling on thermal management of fast discharging lithium-ion battery,” J. Energy Storage, vol. 53, art. 105051, 2022. https://doi.org/10.1016/j.est.2022.105051
A. Sarchami et al., “A novel nanofluid cooling system for modular lithium-ion battery thermal management based on wavy/stair channels,” Int. J. Therm. Sci., vol. 182, art. 107823, 2022. https://doi.org/10.1016/j.ijthermalsci.2022.107823
K. Joshi, D. Dandotiya, C. S. Ramesh, and S. Panchal, “Numerical analysis of battery thermal management system using passive cooling technique,” SAE Technical Paper, 2023. [Online]. Available: https://doi.org/10.4271/2023-01-0990
S. Panchal, V. Pierre, M. Cancian, O. Gross, F. Estefanous, and T. Badawy, “Development and validation of cycle and calendar aging model for 144Ah NMC/graphite battery at multi temperatures, DODs, and C-rates,” SAE Technical Paper, 2023. [Online]. Available: https://doi.org/10.4271/2023-01-0503
H. A. Hasan, S. Jenan, M. A. Azher, S. S. Hakim, and K. Sopian, “Improve the performance of solar thermal collectors by varying the concentration and nanoparticles diameter of silicon dioxide, Open Engineering, vol. 12, no. 1, pp. 743–751, 2022. https://doi.org/10.1515/eng-2022-0339
K. A. Ameen, M. J. A. Hasan, Al-Dulaimi, A. M. Abed, and F. Haidar, “Improving the performance of air conditioning unit by using a hybrid technique,” MethodsX, vol. 9, art. 101620, 2022. https://doi.org/10.1016/j.mex.2022.101620
W. Li et al., “An internal heating strategy for lithium-ion batteries without lithium plating based on self-adaptive alternating current pulse,” IEEE Trans. Vehic. Tech., vol. 72, no. 5, pp. 5809–5823, 2022. https://doi.org/10.1109/TVT.2022.3229187
H. A. Hasan, S. S. Jenan, J. M. Mahdi, H. Togun, M. A. Azher, R. K. Ibrahim, and W. Yaïci, “Experimental evaluation of the thermoelectrical performance of photovoltaic-thermal systems with a water-cooled heat sink,” Sustainability, vol. 14, no. 16, art. 10231, 2022. https://doi.org/10.3390/su141610231
R. Braga et al., “Transient electrochemical model development and validation of a 144 Ah cell performance under different drive cycles conditions,” SAE Technical Paper, 2023. [Online]. Available: https://doi.org/10.4271/2023-01-0513
N. S. Rukman et al., “Bi-fluid cooling effect on electrical characteristics of flexible photovoltaic panel,” J. Mech. Electr. Power, and Veh. Tech., vol. 12, no. 1, pp. 51–56, 2021. https://doi.org/10.14203/J.MEV.2021.V12.51-56
C. Vivek, A. S Dhoble, S. Panchal, D. Fowler, and D. Fraser, “Experimental and numerical investigation on thermal characteristics of 2×3 designed battery module,” 2023. [Online]. Available: https://dx.doi.org/10.2139/ssrn.4568465
H. N. Khaboshan, F. Jaliliantabar, A. Abdullah, and S. Panchal, “Improving the cooling performance of cylindrical lithium-ion battery using three passive methods in a battery thermal management system,” Appl. Therm. Eng., vol. 227, art. 120320, 2023. https://doi.org/10.1016/j.applthermaleng.2023.120320
K. A. Ameen., M. J. Al-Dulaimi, H. A. Abrahem, and H. A. Hasan, “Experimental study to increase the strength of the adhesive bond by increasing the surface area arrangement,” IOP Conf. Ser. Mater. Sci. Eng., vol. 765, pp. 1–10, 2020. https://doi.org/10.1088/1757-899X/765/1/012054
A. M. Aboghrara, B. T. H. T. Baharudin, M. A. Alghoul, N. M. Adam, A. A. Hairuddin, H. A. Hasan, “Performance analysis of solar air heater with jet impingement on corrugated absorber plate,” Case Stud. Therm. Eng., vol. 10, pp. 111–120, 2017. https://doi.org/10.1016/j.csite.2017.04.002
H. Abdulrasool, A. Ali, L. Abdulredh, and M. A. Azher, “Numerical investigation of nanofluids comprising different metal oxide nanoparticles for cooling concentration photovoltaic thermal CPVT,” Cleaner Eng. Tech., vol. 10, art. 100543, 2022. https://doi.org/10.1016/j.clet.2022.100543
H. Togun et al., “Numerical simulation on heat transfer augmentation by using innovative hybrid ribs in a forward-facing contracting channel,” Symmetry, vol. 15, no. 3, art. 690, 2023. https://doi.org/10.3390/sym15030690
A-dulaimi, J. Mustafa, H. H. Areej, H. A. Hasan, and F. A. Hamad, “Energy and exergy investigation of a solar air heater for different absorber plate configurations,” Int. J. Automot. Mech. Eng., vol. 20, no. 1, pp. 10258–10273, 2023. https://journal.ump.edu.my/ijame/article/view/7317/2742
A. Hasan, H. T. Husam, M. A. Azher, I. M. Hayder, and N. Biswas, “A novel air-cooled Li-ion battery (LIB) array thermal management system – a numerical analysis,” Int. J. Therm. Sci., vol. 190, art. 108327, 2023. https://doi.org/10.1016/j.ijthermalsci.2023.108327
M. Bahiraei, F. Nazri, and G. A. Saif, « Electrochemical-thermal model of pouch-type lithium-ion batteries,” Electrochimica Acta, vol. 247, pp. 569-587, 2017. http://dx.doi.org/10.1016/j.electacta.2017.06.164
M. S. A. Kashkooli, F. M. Ghalambaz, and A. J. Chamkha, “Free convection of hybrid Al2O3-Cu water nanofluid in a differentially heated porous cavity,” Adv. Powder Tech., vol. 28, no. 9, pp. 2295-2305, 2017. https://doi.org/10.1016/J.APT.2017.06.011
Y. Pan et al., “Advances in photocatalysis based on fullerene C60 and its derivatives: Properties, mechanism, synthesis, and applications,” App. Catal. B Environ, vol. 265, art. 118579, 2020. https://doi.org/10.1016/j.apcatb.2019.118579
Z. Rao, Z. Qian, Y. Kuang, and Y. Li, “Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface,” Appl. Therm. Eng., vol. 123, pp. 1514–1522, 2017. https://doi.org/10.1016/j.applthermaleng.2017.06.059
Y. Huo, Z. Rao, X. Liu, and J. Zhao, “Investigation of power battery thermal management by using mini-channel cold plate,” Energy Convers. Manage., vol. 89, pp. 387–395, 2015. https://doi.org/10.1016/j.enconman.2014.10.015
A. Benabderrahmane, A. Benazza, S. Laouedj, and J. P. Solano, “Numerical analysis of compound heat transfer enhancement by single and two-phase models in parabolic trough solar receiver,” Mechanika, vol. 23, pp. 55-61, 2017. https://doi.org/10.5755/j01.mech.23.1.14053
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
License
Copyright (c) 2025 Amina Benabderrahmane, Samir Laouedj
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
From the edition of the V23N3 of year 2018 forward, the Creative Commons License "Attribution-Non-Commercial - No Derivative Works " is changed to the following:
Attribution - Non-Commercial - Share the same: this license allows others to distribute, remix, retouch, and create from your work in a non-commercial way, as long as they give you credit and license their new creations under the same conditions.
2.jpg)
